What is the process of heat treatment?

Which state of equilibrium's example is, A cone resting on its base?

Which mode is used for five positioning (Micron level) of the axis movement?

How much time is allowed normally in soaking zone for a 10mm thick metal piece while hardening?

What is the minimum permissible area of conductor (U/G cable) for three and half cores cable?

What is the purpose of G28 code based on FANUC CNC control system?

Which M code is used to activate coolant pump in CNC machine?

What is the use of Goo activates the command?

Which specification is other than general specification?

Which mode, the cutting tool returns back to its home position?

What is the total construction cost of a house construction area of 3000 sq.ft. (cost of construction Rs.2000/- per sq.ft including material and labour)?

Which is thermosetting plastic?

What is the unit of strain?

Which code suitable for circular interpolation counter clockwise direction?

What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm²? (Pi = 22/7)

What is the centre of gravity of a sphere?

What is the relative permittivity of rubber?

What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm²? (Pi = 22/7)

What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm²? (Pi = 22/7)

Which one of the following code is used for tool nose compansation at left side?

What is the minimum permissible area of conductor (U/G cable) for three and half cores cable?

What is the weight of a rectangular block of a cost iron of 250cm X 20cm X 8cm (density of cast iron is 7.8 gm/cm³)?

Which one of the following geometrical shape's centre of gravity lies from its base is 1/3 of its height?

Which is the suitable nitriding process for all alloyed and unalloyed steels?

What is the maximum percentage of stretch of its original length is allowable for elastic materials?

What is an over estimate?

What is the total cost of Air-conditioners installed in a college, 40 class room-each 1 Air-conditioner, Computer lab 5 Air- conditioners and conference hall 5 Air-conditioners (Cost of one air conditioner Rs.30000/- including installation)?

Which code suitable for circular interpolation counter clockwise direction?

Which heat treatment process is done to refine the grain structure of the steel?

Which state of equilibrium's example is, A cone resting on its base?

What is the term, for the details of materials, brand name, grade of quality, rating of current and voltage etc.?

What do you mean by MPG?

Which affects the centre of gravity of the object

Which specification is other than general specification?

Which command activates in automatic mode?

What is the activity of code M06 based on FANUC CNC control system?

What is the name of the point at which all the weight of the body concentrated?

What is the weight of a rectangular block of a cost iron of 250cm X 20cm X 8cm (density of cast iron is 7.8 gm/cm³)?

What is the tensile strain if a force of 3.2 KN is applied to a bar of original length 2800 mm extends the bar by 0.5 mm?

What is the name of a booklet, the rates of various terms are indicated?

Which symbol is used to express change in length?

Which process steel is heated in a carbonaceous atmosphere for the penetration of carbon?

What is the full form of MDI?

What is the name of a booklet, the rates of various terms are indicated?

What is the other term of pocket reference in engineering works?

What is the name of the point at which all the weight of the body concentrated?

Which code is suitable for tool nose radius compensation at right side?

What is the ratio between the change in dimension to its original dimension of the substance?

Which of the following feed back devices can sense both speed and position?

What is the ratio between the change in dimension to its original dimension of the substance?