What is the reading of the vernier bevel protractor shown in the figure? | ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವ ವರ್ನಿಯರ್ ಬೆವೆಲ್ ಪ್ರೊಟ್ರಾಕ್ಟರ್‌ನ ರೀಡಿಂಗ್ ಏನು?

How is the problem of the connecting rod subjected to continuously alternating load condition is rectified? | ನಿರಂತರವಾಗಿ ಪರ್ಯಾಯ ಲೋಡ್ ಸ್ಥಿತಿಗೆ ಒಳಪಡುವ ಸಂಪರ್ಕಿಸುವ ರಾಡ್ನ ಸಮಸ್ಯೆಯನ್ನು ಹೇಗೆ ಸರಿಪಡಿಸಲಾಗುತ್ತದೆ?

Which tool is used in sheet metal work to scribe a circle or arc with a large diameter? | ದೊಡ್ಡ ವ್ಯಾಸವನ್ನು ಹೊಂದಿರುವ ಶೀಟ್ ಮೆಟಲ್ ಕೆಲಸದಲ್ಲಿ ವೃತ್ತ (ಡಯಾಮೀಟರ್) ಅಥವಾ ಚಾಪವನ್ನು (ಆರ್ಕ್) ಬರೆಯಲು ಯಾವ ಸಾಧನವನ್ನು ಬಳಸಲಾಗುತ್ತದೆ?

Which fastenersʹ components cannot be separated without any damage? | ಯಾವ ಫಾಸ್ಟೆನರ್ ಕಾಂಪೋನೆಂಟ್ಗಳನ್ನು ಯಾವುದೇ ಹಾನಿಯಾಗದಂತೆ ಬೇರ್ಪಡಿಸಲಾಗುವುದಿಲ್ಲ?

Why hole basis system is preferred over shaft basis system? | ಶಾಫ್ಟ್ ಬೇಸ್ ಸಿಸ್ಟಮ್‌ಗಿಂತ ಹೋಲ್ ಬೇಸ್ ಸಿಸ್ಟಮ್‌ಗೆ ಏಕೆ ಆದ್ಯತೆ ನೀಡಲಾಗಿದೆ?

Calculate the RPM for a HSS drill, diameter is 24 mm and the cutting speed is 30 m/min. | HSS ಡ್ರಿಲ್‌ಗಾಗಿ RPM ಅನ್ನು ಲೆಕ್ಕಾಚಾರ ಮಾಡಿ, ವ್ಯಾಸವು 24 mm ಮತ್ತು ಕತ್ತರಿಸುವ ವೇಗವು 30 m/min ಆಗಿದೆ.

What is the first step of the autonomous maintenance? | ಸ್ವಾಯತ್ತ ನಿರ್ವಹಣೆಯ (ಅಟಾನಮಸ್ ಮೆಂಟೆನೆನ್ಸ್ ) ಮೊದಲ ಹಂತ ಯಾವುದು?

Which type of thread is used in lathe head screw?

What is the term the distance from a point on thread to the corresponding point on next thread?

What is the relationship between pitch and lead of a single start thread?

Which type of thread have higher mechanical advantage?

Which formula is used to find crest width of a buttress thread?

Where multistart threads are used?

What does BIS stands for?

What is the meaning of M24 in M 24 x 3 single start thread?

What is the width of the tool to cut a square thread of 60 x 9 mm pitch?

Which of the following used buttress thread?

What will be the effect in helix angle if diameter changes for a given lead?

How multi start threads are specified?

What is the relation between pitch and lead in multistart thread?

What is the purpose of idler gear in simple gear train?

Which formula to be used to find depth of buttress thread?

How much angle is to be added for lead angle of a square thread as clearance to the helix angle?

What will be the effect in helix angle if lead changes for a give diameter work?

Which parameter will decide the driver and driven gear ratio to cut thread on lathe?

What is the formula to calculate the core dia of the square thread?

Calculate the flat width of 10 mm pitch buttress thread?

What is the name of first member in a simple gear train?

Calculate the depth of buttress thread diameter 30 mm pitch 3 mm?

Calculate the change gear to cut 6 mm pitch on a work having a lead screw of 5 mm pitch. Gears available from 20 to 120 teeth by 5 teeth range.

Calculate pitch diameter of M16 x 2 mm square thread?

Calculate the pitch diameter of M 36 x 4 mm square thread?

What is the gear ratio if the lathe constant value is one?

What is the nose cutter width of the square threads tool?

Which thread has only one helical formation?

What is the purpose of change gear train in centre lathe?

Calculate pitch diameter of f 24 x 3 mm square thread?

What is the angle of saw tooth thread?

How many numbers of gears having in a simple gear train?

Calculate change gears to cut a three start thread having a pitch of 1.5 mm; the lead screw has a pitch of 6 mm.

What is the name of last member in a simple gear train?

Calculate the depth of buttress thread 60 mm diameter and 9 mm pitch?

What is the included angle of acme thread?

What is the lead of M 24 x 3.5 triple start thread?

What is the lead of M 10 x 1.5 double start thread?

Calculate the change gear to cut 8 mm pitch on a work having a lead screw of 4 mm pitch gear 20 to 120 teeth by 5 teeth range

How many number of teeth gear is used to as translating gear to cut metric thread on British lathe?

Where the knuckle threads are used?

What type of thread is used in screw jack machine?

What is the depth of 0.5 inch BSW 13TPI single start thread?