What is the name of the part marked as ‘X’ shown in the figure? | ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವ ʹXʹ ಎಂದು ಗುರುತಿಸಲಾದ ಭಾಗದ ಹೆಸರೇನು?

Separating paper and plastic from bio waste before throwing them away is ________ | ಅವುಗಳನ್ನು ಎಸೆಯುವ ಮೊದಲು ಜೈವಿಕ ತ್ಯಾಜ್ಯದಿಂದ ಕಾಗದ ಮತ್ತು ಪ್ಲಾಸ್ಟಿಕ್ ಅನ್ನು ಬೇರ್ಪಡಿಸುವುದು ________

Why silicate bond is preferred for grinding fine tools and cutters than vitrified bond? | ವಿಟ್ರಿಫೈಡ್ ಬಾಂಡ್‌ಗಿಂತ ಉತ್ತಮವಾದ ಉಪಕರಣಗಳು ಮತ್ತು ಕಟ್ಟರ್‌ಗಳನ್ನು ಗ್ರೈಂಡಿಂಗ್ ಮಾಡಲು ಸಿಲಿಕೇಟ್ ಬಾಂಡಿಂಗ್ ಏಕೆ ಆದ್ಯತೆ ನೀಡಲಾಗುತ್ತದೆ?

If more workers know how to work, what will happen?

What is the name of the tool used in the sheet metal work is shown in the figure? | ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವ ಶೀಟ್ ಮೆಟಲ್ ಕೆಲಸದಲ್ಲಿ ಬಳಸಿದ ಉಪಕರಣದ ಹೆಸರೇನು?

What is called if a body does not change its position with respect to its surroundings?

What is the purpose of using goggles during chipping the slag from weld bead?

Why the measuring instruments are calibrated? | ಅಳತೆ ಉಪಕರಣಗಳನ್ನು ಏಕೆ ಕ್ಯಾಲಿಬ್ರೇಟ್ ಮಾಡಲಾಗುತ್ತದೆ?

What is an over estimate?

What is the name of the part marked as ‘X’shown in the figure? | ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವ ʹXʹ ಎಂದು ಗುರುತಿಸಲಾದ ಭಾಗದ ಹೆಸರೇನು?

What denotes letter M in MKS system?

What is the total surface area of a cylinder having radius 2 metres and height 5 metres?

What is the carbon percentage in low carbon steel?

What is the expanded form of (a+b)²?

Wha is the mass if the density of a body is 7.6 g/cm³ and its volume is 25 cm³?

Which state of equilibrium's example is A cone resting on its tip?

What is the area of a square whose side is 18 cm?

Which part of a central AC system cannot be repaired after pump down operation?

Which is thermosetting plastic?

What is the value of (a⁵)⁷?

What is the efficiency of a simple screw jack having velocity ratio is 314.2 and mechanical advantage is 220?

What is the centre of gravity of a right circular cone from its base?

What is the specific gravity of the metal, if the weighs 6.5 kgf in air and 3.5 kgf in water?

Which is example for second order lever?

Which is the example for statically induced emf?

What is the mechanical advantage, if a load of 1000 kg is lifted by a simple machine and effort applied is 250 kg?

What is the value for specific heat of water

Which IE rules are to be verified on completion of wiring on any new installation?

What is the diagonal of a square plate whose side is 28 cm?

What is the centre of gravity of a semi circle of diameter 12 cm?

How have workplaces changed after COVID?

A secure Wi-Fi is one ______. | ಸುರಕ್ಷಿತ Wi-Fi ಒಂದು ______ ಆಗಿದೆ.

In a manufacturing unit, the packaging process is taking longer than usual time, causing delays in shipments. What should the workers do? | ಉತ್ಪಾದನಾ ಘಟಕದಲ್ಲಿ, ಪ್ಯಾಕೇಜಿಂಗ್ ಪ್ರಕ್ರಿಯೆಯು ಸಾಮಾನ್ಯ ಸಮಯಕ್ಕಿಂತ ಹೆಚ್ಚು ಸಮಯ ತೆಗೆದುಕೊಳ್ಳುತ್ತದೆ, ಇದು ಸಾಗಣೆಯಲ್ಲಿ ವಿಳಂಬವನ್ನು ಉಂಟುಮಾಡುತ್ತದೆ. ಕಾರ್ಮಿಕರು ಏನು ಮಾಡಬೇಕು?

Anita is going to the bank today to ask for a loan. She has prepared a business plan. Which of the following will make her business plan strong?

Which hand tool is used to finish the resharpened divider point? | ಮರು ಹರಿತಗೊಳಿಸಲಾದ ಡಿವೈಡರ್ ಪಾಯಿಂಟ್‍ನ್ನು ಫಿನಿಷ್ ಮಾಡಲು ಯಾವುದನ್ನು ಬಳಸಲಾಗಿತ್ತದೆ?

Raghav joined a new company after COVID. He is nervous about using the digital tablets provided at work. What should he do?

Which process makes the grinding wheel run in concentric circles? | ಯಾವ ಪ್ರಕ್ರಿಯೆಯು ಗ್ರೈಂಡಿಂಗ್ ಚಕ್ರವನ್ನು ಕಾಂಸೆಂಟ್ರಿಕಾಗಿ ಚಲಿಸುವಂತೆ ಮಾಡುತ್ತದೆ?

What is the name of the stake shown in the figure? | ಚಿತ್ರದಲ್ಲಿ ತೋರಿಸಿರುವ ಸ್ಟೇಕ್ ನ ಹೆಸರೇನು?

What is the square root of 0.017?

What is the name of the die that has a slot cut to permit slight variation in size? | ಗಾತ್ರದಲ್ಲಿ ಸ್ವಲ್ಪ ವ್ಯತ್ಯಾಸವನ್ನು ಅನುಮತಿಸಲು ಸ್ಲಾಟ್ ಕಟ್ ಹೊಂದಿರುವ ಡೈ ಹೆಸರೇನು?

Which tool materials are manufactured by powder metallurgy technique? | ಪೌಡರ್ ಮೆಟಲರ್ಜಿ ತಂತ್ರದಿಂದ ಯಾವ ಸಾಧನ ಸಾಮಗ್ರಿಗಳನ್ನು ತಯಾರಿಸಲಾಗುತ್ತದೆ?

What is the name of the part marked as “X” shown in the figure? | ಅರದ (ಫೈಲ್) ಭಾಗವಾಗಿ ಗುರುತಿಸಿರುವ “x”ನ ಹೆಸರೇನು?

Which is an integral part of the stock in vernier bevel protractor? | ವೆರ್ನಿಯರ್ ಬೆವೆಲ್ ಪ್ರೊಟ್ರಾಕ್ಟರ್‌ನಲ್ಲಿ ಸ್ಟಾಕ್‌ನ ಅವಿಭಾಜ್ಯ ಭಾಗ ಯಾವುದು?

Fill up the blanks with suitable words so as to become a meaningful sentence. The Principal called Manoj and asked ______ to show ______ hall ticket for the CTS Examination. | ಅರ್ಥಪೂರ್ಣ ವಾಕ್ಯವಾಗಲು ಸೂಕ್ತವಾದ ಪದಗಳೊಂದಿಗೆ ಖಾಲಿ ಜಾಗಗಳನ್ನು ಭರ್ತಿ ಮಾಡಿ. The Principal called Manoj. The Principal asked ______ to show ______ hall ticket for the CTS Examination.

Why are ribs provided in the angle plate? | ಆಂಗಲ್ ಪ್ಲೇಟ್ನಲ್ಲಿ ರಿಬ್ಬ್ಗಳನ್ನು ಏಕೆ ಒದಗಿಸಲಾಗಿದೆ?

Which safety apparel is worn while handling thin sheets? | ತೆಳುವಾದ ಹಾಳೆಗಳನ್ನು ನಿರ್ವಹಿಸುವಾಗ ಯಾವ ಸುರಕ್ಷತಾ ಉಡುಪುಗಳನ್ನು ಧರಿಸಲಾಗುತ್ತದೆ?

What is the cooling capacity for 1.5 Ton of ductable split air conditioner?

How can users access the Skill India Digital Platform?

Which is equal to electric power?

What does it mean to think like a business person? | ವ್ಯಾಪಾರ ವ್ಯಕ್ತಿಯಂತೆ ಯೋಚಿಸುವುದರ ಅರ್ಥವೇನು?